Common knowledge in daily maintenance of sprayer-Common Sense-News-Luoyang Wofa Machinery Co., Ltd

Common knowledge in daily maintenance of sprayer

Time：2025-07-08　Click：105

The maintenance and upkeep of the sprayer are closely related. During the maintenance process, it may be discovered that there are signs of malfunction or damage to a certain part of the machine, and it can be detected and maintained in advance. Therefore, daily maintenance is necessary in daily operation to extend the service life.

1、 Maintenance method of sprayer

In the current situation of the sprayer industry, the maintenance and upkeep of Senlik sprayers are divided into three parts, and the following three systems are maintenance.

1) Partial cleaning and maintenance of diesel engines

Under normal circumstances, diesel engines need to be cleaned and maintained once a week, or when you notice the engine shaking, decelerating, and accelerating, it may be smoked once. Carbon removal and gel system to prevent harmful corrosion, avoid and prevent leakage and sealing of coolant tanks, allowing for complete replacement of old filters.

2) Deepening and maintenance of lubrication system for sprayer

The main function of the lubrication system is to lubricate the engine, oil tank, and water pump on the injector to prevent excessive wear. Under normal circumstances, it is necessary to clean and maintain the engine once a week. When the engine noise is too loud, the acceleration is weak, and the water temperature is too high, it is also necessary to clean and maintain it once. Clean the oil sludge and other products inside the engine to avoid high-temperature oxidation and thickening, reduce engine component wear, extend engine life, and improve engine power.

3) Cleaning and maintenance of the gearbox of the sprayer

Under normal circumstances, the gearbox of the soil sprayer is cleaned or maintained every half month. Once the gearbox slips, it can be cleaned and maintained. Remove harmful sludge and paint film deposits, restore the elasticity of gaskets and O-rings, and ensure smooth shifting of the gearbox to improve power output and replace old automatic transmission oil.

The above is the introduction of the sprayer brought to you by the editor, hoping to be helpful to everyone.

What aspects of inspection should be carried out on the diesel engine before using slope greening equipment

Slope greening equipment, mainly aimed at highway (railway) slope greening, slope protection, mountain governance, mine greening, desert control, garbage landfill treatment and other projects, to improve the ecological environment landscape. Today, the editor will introduce to you the detailed operation steps of slope greening equipment. The diesel engine is the power source of the slope greening equipment sprayer. To ensure the dynamic performance of the diesel engine, the following checks were conducted on the diesel engine before starting the slope greening equipment.1. Check the water condition of the water tank before starting the sprayerWhen the diesel engine is working, excessive temperature in the engine body will be cooled by water cooling. Once the water tank is short of water, it can cause cylinder card failure and bring disaster to the diesel engine.2. Check the status of diesel hydrogenationDiesel is the fuel for diesel engines. Add enough oil to the diesel engine. In addition, after adding diesel, place the air in the oil circuit (loosen the bolts on the fuel filter, continuously press the low-pressure manual pump, and discharge the air in the oil circuit).3. Check the refueling statusPull out the dipstick, clean up any residue on the cloth or soft paper, and then insert it again. After pulling it out, check which position of the adhesive oil is above the warning line.Through the above three inspections of the diesel engine, if everything is normal, the slope greening equipment can be safely started.

2025-07-08

Measures to prevent the lack of radiation interval in sprayers

Spraying machine is a new greening method introduced from abroad, which separates spraying and non irrigation technologies. It mixes grass seeds with water retaining agents, adhesives, green fiber coverings, fertilizers, etc. in the mixing tank of the spraying machine to form a gel like mixed slurry, which is then sprayed onto the soil to be planted using a mud pump. The use of sprayers for slope greening operations is a common method, but regardless of the type of mechanical equipment, long-term use may lead to hardware problems. Today, we will propose measures to prevent the lack of radiation intervals in sprayers.Measures to prevent the lack of radiation interval in sprayers:Measure 1:After daily use, carefully clean the discharge pipeline;Measure 2:When loading, be careful not to drop foreign objects into the tank to prevent pipeline blockage. Regarding the machine for spraying mud, if it is used for 1-2 years, it may also be due to the wear of the slurry pump impeller, resulting in a lack of radial spacing.During the process of using the sprayer, our improper operation may bring irreparable consequences to the mechanical equipment of the sprayer. Therefore, the above summary hopes to provide assistance to everyone.

2025-07-08

Common issues with sprayers during construction operations

As a large-scale slope spraying equipment, the sprayer has a plant protection effect on the greening of barren soil slopes. However, when it comes to the use of the sprayer, there may be some obstacles that hinder the sprayer from spraying seeds, including any step in the spraying process. Next, we will provide a detailed explanation of these obstacles.Question 1:When spraying, sometimes there may be a problem of insufficient spraying distance.Question 2:A lot of foam sometimes appears inside the tank when the sprayer is stirring.Question 3:The speed of the mixing shaft of the sprayer will gradually slow down.The above three problems with the sprayer may seem minor, but once any of them occur during construction, it will hinder the progress of the sprayer's operation in slope greening and plant protection projects. If other problems arise during future use, additional supplements can be made based on these three issues.

2025-07-08