0379-67885866
Contact

Common Sense

Common issues with sprayers during construction operations

Time:2025-07-08 Click:73

As a large-scale slope spraying equipment, the sprayer has a plant protection effect on the greening of barren soil slopes. However, when it comes to the use of the sprayer, there may be some obstacles that hinder the sprayer from spraying seeds, including any step in the spraying process. Next, we will provide a detailed explanation of these obstacles.


Question 1:


When spraying, sometimes there may be a problem of insufficient spraying distance.


Question 2:


A lot of foam sometimes appears inside the tank when the sprayer is stirring.


Question 3:


The speed of the mixing shaft of the sprayer will gradually slow down.


The above three problems with the sprayer may seem minor, but once any of them occur during construction, it will hinder the progress of the sprayer's operation in slope greening and plant protection projects. If other problems arise during future use, additional supplements can be made based on these three issues.

Common knowledge in daily maintenance of sprayer

The maintenance and upkeep of the sprayer are closely related. During the maintenance process, it may be discovered that there are signs of malfunction or damage to a certain part of the machine, and it can be detected and maintained in advance. Therefore, daily maintenance is necessary in daily operation to extend the service life.1、 Maintenance method of sprayerIn the current situation of the sprayer industry, the maintenance and upkeep of Senlik sprayers are divided into three parts, and the following three systems are maintenance.1) Partial cleaning and maintenance of diesel enginesUnder normal circumstances, diesel engines need to be cleaned and maintained once a week, or when you notice the engine shaking, decelerating, and accelerating, it may be smoked once. Carbon removal and gel system to prevent harmful corrosion, avoid and prevent leakage and sealing of coolant tanks, allowing for complete replacement of old filters.2) Deepening and maintenance of lubrication system for sprayerThe main function of the lubrication system is to lubricate the engine, oil tank, and water pump on the injector to prevent excessive wear. Under normal circumstances, it is necessary to clean and maintain the engine once a week. When the engine noise is too loud, the acceleration is weak, and the water temperature is too high, it is also necessary to clean and maintain it once. Clean the oil sludge and other products inside the engine to avoid high-temperature oxidation and thickening, reduce engine component wear, extend engine life, and improve engine power.3) Cleaning and maintenance of the gearbox of the sprayerUnder normal circumstances, the gearbox of the soil sprayer is cleaned or maintained every half month. Once the gearbox slips, it can be cleaned and maintained. Remove harmful sludge and paint film deposits, restore the elasticity of gaskets and O-rings, and ensure smooth shifting of the gearbox to improve power output and replace old automatic transmission oil.The above is the introduction of the sprayer brought to you by the editor, hoping to be helpful to everyone.

2025-07-08

Detailed operation steps of slope greening equipment

Slope greening equipment, mainly aimed at highway (railway) slope greening, slope protection, mountain governance, mine greening, desert control, garbage landfill treatment and other projects, to improve the ecological environment landscape. Today, the editor will introduce to you the detailed operation steps of slope greening equipment.1) After the diesel engine is started. It should not be operated at full capacity. When the cooling water temperature reaches 60 degrees, the diesel engine should be heated at low speed to increase speed and full load.2) Appropriately increase the throttle, pull down and open the mixing rod, while observing the mixing situation inside the box, and gradually adjust the mixing speed to the appropriate level. If reverse stirring is used in work, it should be stopped during the transition and pulled down again.3) When the pump switch is turned off, the sprayed material enters the box through the circulation pipe for jet circulation.5) According to the ratio of spraying materials, add the spraying substrate to the stirred material in sequence. It should be noted that it should be evenly dispersed and not poured in large quantities to avoid the formation of colloidal packaging, which may affect the spraying effect.6) All materials are evenly mixed and stirred at low speed or stop, the power clutch is disengaged, the injection valve is opened, and the circulation valve is closed.7) Keep the spray gun control lever in the spraying direction, place the power clutch in the open position, gradually increase the throttle, and enter the spraying structure.8) Before use, please check the connection of the positive and negative terminals of the battery. Check whether the screws of each part of the machine are loose, whether there are large foreign objects, and whether the diesel engine has enough diesel.9) After inspection, fill the diesel tank with water and add diesel from the mailbox (add 10 diesel in winter). Add an appropriate amount of water to the water tank as needed.10) Start the engine on the diesel engine for top mixing. After starting, lower the clutch behind the operating platform, then hang the gear in the positive direction and increase or decrease the throttle control as needed until fully mixed.11) When stopping use, simply reduce the throttle and turn off the engine.The above is the introduction of the operation steps of slope greening equipment brought to you by the editor, hoping to be helpful to everyone!

2025-07-08

Suggestions on choosing a soil spraying machine for highway greening

In recent years, with the improvement of people's economic level, almost every family has bought a car. Due to urban congestion, highways have become a key transportation point for travel, so greening highways should be given more attention.When greening the slopes of highways, good greening equipment should be selected. Luoyang Wofa Spraying Machine has been producing soil spraying machines for long-term use in highway greening, mine greening, garbage landfill, etc. When we use soil spraying machines to green both sides of the highway, not only does it become beautiful, but the use of vegetation on the road can also reduce vehicle noise, greatly reduce exhaust emissions, and residents on both sides will not be affected by air pollution. Of course, tall fescue and dogtooth root are usually chosen as vegetation, which have relatively low costs. When planting, only some basic methods need to be followed, and then seasonal pest control should be carried out to avoid large-scale pest erosion of the grass. Of course, in the process of planting, the main thing is for workers to handle it carefully. If the grass seeds are just randomly planted in the soil, it is even more impossible to achieve large-scale grass greening. However, for the greening of high slopes, attention should be paid to the selection of vegetation and sprayers.For green equipment such as soil spraying machines, durable and widely used equipment should be selected as much as possible, because the construction requirements vary for different slopes, some requiring mud and some requiring grass fibers.The main purpose of selecting vegetation is to prevent water erosion and protect the roadbed. Of course, it can also reduce noise and create a more beautiful driving environment, so that drivers can have a happier mood while driving. After the construction of highways, soil problems are more likely to occur, so efforts should be made to avoid damaging the natural terrain and to use some herbs that are more convenient to plant. This will save time and money, and also facilitate future management.The above are the suggestions provided by the editor regarding the selection of soil spraying machines and vegetation for highway greening. We hope they are helpful to everyone!

2025-07-08