What aspects of inspection should be carried out on the diesel engine before using slope greening equipment-Common Sense-News-Luoyang Wofa Machinery Co., Ltd

What aspects of inspection should be carried out on the diesel engine before using slope greening equipment

Time：2025-07-08　Click：72

Slope greening equipment, mainly aimed at highway (railway) slope greening, slope protection, mountain governance, mine greening, desert control, garbage landfill treatment and other projects, to improve the ecological environment landscape. Today, the editor will introduce to you the detailed operation steps of slope greening equipment. The diesel engine is the power source of the slope greening equipment sprayer. To ensure the dynamic performance of the diesel engine, the following checks were conducted on the diesel engine before starting the slope greening equipment.

1. Check the water condition of the water tank before starting the sprayer

When the diesel engine is working, excessive temperature in the engine body will be cooled by water cooling. Once the water tank is short of water, it can cause cylinder card failure and bring disaster to the diesel engine.

2. Check the status of diesel hydrogenation

Diesel is the fuel for diesel engines. Add enough oil to the diesel engine. In addition, after adding diesel, place the air in the oil circuit (loosen the bolts on the fuel filter, continuously press the low-pressure manual pump, and discharge the air in the oil circuit).

3. Check the refueling status

Pull out the dipstick, clean up any residue on the cloth or soft paper, and then insert it again. After pulling it out, check which position of the adhesive oil is above the warning line.

Through the above three inspections of the diesel engine, if everything is normal, the slope greening equipment can be safely started.

What aspects should be considered when using a sprayer for greening operations

Slope greening is an important project that plays a crucial role in beautifying the environment and preventing soil erosion. Spraying machines for greening operations need to consider climate and soil types, as well as drought resistance, barrenness resistance, pollution resistance, ornamental trees, and ground cover plants. They should be able to adapt to local land conditions, meet the requirements of road greening, and achieve the unity of function, art, and science.So what aspects should be considered when using a sprayer for greening operations? Let's take a look together.1. Choose a suitable climate: firstly, seeds can germinate; secondly, germinating animals can survive the winter; thirdly, safe consumption.2. Choosing the right seeds: with qualified quality, tailored to the situation, suitable for the time, mixed planting of grass and irrigation, and complementary effects.3. Choose a balanced proportion of fertilizers such as compound fertilizer, phosphate fertilizer, mud carbon soil, and fermented farmyard manure. Phosphate fertilizer solidifies roots, compound fertilizer has fertilizer efficiency, inorganic fertilizer prevents soil compaction, provides ventilation and air permeability, and fully ferments without burning roots.4. Choose a good soil source: The soil source is qualified with low sand content, high viscosity, few stones, and low moisture content.5. Cover up well: choose a good non-woven fabric, which can prevent rainstorm scouring, and can also keep warm and wet. The reinforced non-woven fabric is more wear-resistant, and can resist the damage caused by the cutting of stone edges and corners by the non-woven fabric disturbed by breeze.6. Selecting workers: Integrate construction workers, gunners, machine operators, salespersons, team leaders, and skilled workers together, divide labor and cooperate with each other, and complete obligations on time, with quality and quantity.The above are the considerations that need to be taken into account when using a sprayer for greening operations. When selecting seeds, it is important to choose vines that are tolerant to poor conditions and drought, have strong growth potential, and grow quickly. This way, plants can grow even in poor environments. For workers, it is recommended to choose skilled people to work together. This operation tests the ability of a team to assist, and it is not enough for one person to be strong.

2025-07-08

Common knowledge in daily maintenance of sprayer

The maintenance and upkeep of the sprayer are closely related. During the maintenance process, it may be discovered that there are signs of malfunction or damage to a certain part of the machine, and it can be detected and maintained in advance. Therefore, daily maintenance is necessary in daily operation to extend the service life.1. Maintenance method of sprayerIn the current situation of the sprayer industry, the maintenance and upkeep of Senlik sprayers are divided into three parts, and the following three systems are maintenance.1) Partial cleaning and maintenance of diesel enginesUnder normal circumstances, diesel engines need to be cleaned and maintained once a week, or when you notice the engine shaking, decelerating, and accelerating, it may be smoked once. Carbon removal and gel system to prevent harmful corrosion, avoid and prevent leakage and sealing of coolant tanks, allowing for complete replacement of old filters.2) Deepening and maintenance of lubrication system for sprayerThe main function of the lubrication system is to lubricate the engine, oil tank, and water pump on the injector to prevent excessive wear. Under normal circumstances, it is necessary to clean and maintain the engine once a week. When the engine noise is too loud, the acceleration is weak, and the water temperature is too high, it is also necessary to clean and maintain it once. Clean the oil sludge and other products inside the engine to avoid high-temperature oxidation and thickening, reduce engine component wear, extend engine life, and improve engine power.3) Cleaning and maintenance of the gearbox of the sprayerUnder normal circumstances, the gearbox of the soil sprayer is cleaned or maintained every half month. Once the gearbox slips, it can be cleaned and maintained. Remove harmful sludge and paint film deposits, restore the elasticity of gaskets and O-rings, and ensure smooth shifting of the gearbox to improve power output and replace old automatic transmission oil.The above is the introduction of the sprayer brought to you by the editor, hoping to be helpful to everyone.

2025-07-08

What are the precautions to be taken when using slope greening equipment for construction

Slope greening equipment is often used in the terrain environment of slopes, but it is also often used in some irregular terrain areas that are different from slope terrain, such as rocky slopes, high hardness soil, and other unique and difficult to harvest terrain. Here, I will discuss the precautions to be taken when using slope greening equipment for these special slope terrains.Precautions for slope greening equipment construction:Note 1:Before the construction of slope greening equipment, it is necessary to understand the slope gradient and micro geomorphic characteristics of the slope: whether there are landslides, collapses, and dangerous rocks in Panming.Note 2:Regarding soil slopes, it is necessary to investigate the soil layer structure, the burial depth of underlying rocks or hard soil layers, the roughness of the rock surface, and the inclination of the rock surface; For rock slopes, it is necessary to investigate the structural type of the rock mass, whether there are fragile interlayers in the rock mass, the characteristics of the structural planes, the type and features of the slope, and whether there is a free face.Note 3:Determine the degree of weathering of the slope rock mass and whether there is surface runoff causing erosion and side erosion at the foot of the slope, as well as corrosion on the slope surface.Attention: Investigate the impact of open water on slope rock and soil mass, determine the composition and source of open water, and explain the feasibility of guiding the removal of open water.Note 4:Based on the rock conditions, structural characteristics, slope and height of unstable and unstable slopes in other areas. At the same time, the allowable height of various slopes can be verified based on the requirements of relevant specifications and the mechanical properties of slope rock and soil, and the height, slope, and shaking measures of engineering slopes can be affirmed. Without sufficient measures, the slope height should not be the height allowed by geological and geotechnical conditions.After the above description, we can clearly realize that in the process of using slope greening equipment, we must pay attention to the mistakes or improper operations we make subconsciously or improperly. We need to know that everything is fine, and we need to pay attention and be careful from small things in everything we do.

2025-07-08