Common knowledge in daily maintenance of sprayer-Common Sense-News-Luoyang Wofa Machinery Co., Ltd

Common knowledge in daily maintenance of sprayer

Time：2025-07-08　Click：98

The maintenance and upkeep of the sprayer are closely related. During the maintenance process, it may be discovered that there are signs of malfunction or damage to a certain part of the machine, and it can be detected and maintained in advance. Therefore, daily maintenance is necessary in daily operation to extend the service life.

1. Maintenance method of sprayer

In the current situation of the sprayer industry, the maintenance and upkeep of Senlik sprayers are divided into three parts, and the following three systems are maintenance.

1) Partial cleaning and maintenance of diesel engines

Under normal circumstances, diesel engines need to be cleaned and maintained once a week, or when you notice the engine shaking, decelerating, and accelerating, it may be smoked once. Carbon removal and gel system to prevent harmful corrosion, avoid and prevent leakage and sealing of coolant tanks, allowing for complete replacement of old filters.

2) Deepening and maintenance of lubrication system for sprayer

The main function of the lubrication system is to lubricate the engine, oil tank, and water pump on the injector to prevent excessive wear. Under normal circumstances, it is necessary to clean and maintain the engine once a week. When the engine noise is too loud, the acceleration is weak, and the water temperature is too high, it is also necessary to clean and maintain it once. Clean the oil sludge and other products inside the engine to avoid high-temperature oxidation and thickening, reduce engine component wear, extend engine life, and improve engine power.

3) Cleaning and maintenance of the gearbox of the sprayer

Under normal circumstances, the gearbox of the soil sprayer is cleaned or maintained every half month. Once the gearbox slips, it can be cleaned and maintained. Remove harmful sludge and paint film deposits, restore the elasticity of gaskets and O-rings, and ensure smooth shifting of the gearbox to improve power output and replace old automatic transmission oil.

The above is the introduction of the sprayer brought to you by the editor, hoping to be helpful to everyone.

Why does the guest soil sprayer use hydraulic transmission? What are the benefits of this

Everyone knows that the use of soil spraying machines can save a lot of labor costs and improve work efficiency. This type of equipment generally has two transmission methods, one is hydraulic transmission and the other is mechanical transmission.Most of the current soil spraying machines use hydraulic transmission because mechanical transmission is a relatively old transmission method. This method is widely used because the structure of mechanical transmission is simple, easy to maintain, and easy to operate. How can this method be replaced? It is because hydraulic transmission has more advantages, such as being lightweight, flexible, small in size, and will not cause common mechanical mixing failures during high-speed rotation of the machine.What are the specific advantages of using hydraulic transmission in the soil spraying machine? Let me explain them in detail.1. By executing the motion of the original components while maintaining uniform stability during load changes, it can reduce the impact of directional changes on moving parts.2. Under the same power conditions, hydraulic transmission devices have small volume, light weight, and compact structure. Therefore, its inertia is small and the commutation frequency is high. Hydraulic transmission can output large thrust or torque under high pressure. It can achieve low-speed and large tonnage transmission, which is an advantage that cannot be compared to mechanical transmission methods.3. Easy to operate and convenient to adjust and control.4. It is convenient to achieve stepless speed regulation during system operation on a large scale, while achieving stepless speed regulation through mechanical transmission is more difficult.5. Easy to achieve overload protection, safe and reliable to use, the moving parts in each hydraulic component work in oil and can self lubricate, resulting in a long service life.6. Hydraulic components are connected by pipelines and integrated blocks. Its layout and installation have great flexibility and convenience.Through the detailed introduction above, I believe you have a general understanding of the use of hydraulic transmission in the soil spraying machine. With the continuous advancement of technology, better transmission methods will be adopted in the future. Although hydraulic transmission has great advantages now, some mechanical equipment still uses mechanical transmission. Compared with mechanical transmission, there are also some other advantages that hydraulic transmission does not have. The specific choice depends on personal ideas.

2025-07-08

What aspects of inspection should be carried out on the diesel engine before using slope greening equipment

Slope greening equipment, mainly aimed at highway (railway) slope greening, slope protection, mountain governance, mine greening, desert control, garbage landfill treatment and other projects, to improve the ecological environment landscape. Today, the editor will introduce to you the detailed operation steps of slope greening equipment. The diesel engine is the power source of the slope greening equipment sprayer. To ensure the dynamic performance of the diesel engine, the following checks were conducted on the diesel engine before starting the slope greening equipment.1. Check the water condition of the water tank before starting the sprayerWhen the diesel engine is working, excessive temperature in the engine body will be cooled by water cooling. Once the water tank is short of water, it can cause cylinder card failure and bring disaster to the diesel engine.2. Check the status of diesel hydrogenationDiesel is the fuel for diesel engines. Add enough oil to the diesel engine. In addition, after adding diesel, place the air in the oil circuit (loosen the bolts on the fuel filter, continuously press the low-pressure manual pump, and discharge the air in the oil circuit).3. Check the refueling statusPull out the dipstick, clean up any residue on the cloth or soft paper, and then insert it again. After pulling it out, check which position of the adhesive oil is above the warning line.Through the above three inspections of the diesel engine, if everything is normal, the slope greening equipment can be safely started.

2025-07-08

Slope greening equipment manufacturer comes up with a clever solution to solve the mud pump failure of the sprayer

In the previous chapter, the editor mainly listed the common manifestations of faults in the mud pump of the sprayer. In the following article, the editor will answer questions and provide targeted solutions for slope greening equipment manufacturers to solve the problems that occurred in the mud pump of the sprayer in the previous article.Tip 1: Solve the problem of not being able to suck on its owna. The mud pump body of the sprayer is not filled with storage fluid or the storage fluid is insufficient, but sufficient storage fluid is added;b. Leakage in the suction pipeline of the mud pump of the sprayer, check and eliminate the leakage phenomenon;c. The mud pump speed of the sprayer is too low, adjust the sprayer speed;d. The suction stroke of the mud pump of the sprayer is too high or the suction pipeline is blocked, reducing the suction stroke or shortening the suction pipeline;e. Impeller flow channel or suction pipeline blockage, eliminate pipeline blockageTip 2: Insufficient stress reliefa. The impeller or impeller sealing ring is severely worn, replace the mouth ring;b. Insufficient power and low speed, adjust to speed by adding full horsepower;c. The import or export valve is not fully opened, fully open the import or export valve.Tip 3: Solve the problem of excessive consumptiona. Excessive traffic, reduce traffic; The speed is too high, reduce it appropriately;b. Correction or replacement of pump shaft distortion or impeller jamming;c. The flow channel inside the pump is blocked or stuck, eliminate the blockaged. The noise and vibration of the mud pump in the sprayer are relatively high;e. Unstable footing, reinforce;f. Cavitation phenomenon, adjust working conditions;g. The bearing is severely worn and needs to be replaced with a new one;Tip 4: Solve the problem of loud noise and vibrationa. The flow channel inside the sprinkler pump of the sprayer is blocked or stuck, correct or replace it;b. If there are debris in the sprinkler pump or inlet pipeline of the sprayer, remove the debris;c. The main axes of the sprinkler pump and the power machine are different, adjust the coaxiality;Looking at the small tricks listed by the manufacturer of slope greening equipment for solving the problem of mud pump failure in the sprayer, do you feel like the whole world is beautiful in an instant? I sincerely hope that the tips summarized by the editor can be helpful in solving the problem of the mud pump in the sprayer. I have listed them one by one, and I hope that my efforts can be shared to a great extent.

2025-07-08