Detailed operation steps of slope greening equipment-Common Sense-News-Luoyang Wofa Machinery Co., Ltd

Detailed operation steps of slope greening equipment

Time：2025-07-08　Click：61

1) After the diesel engine is started. It should not be operated at full capacity. When the cooling water temperature reaches 60 degrees, the diesel engine should be heated at low speed to increase speed and full load.

2) Appropriately increase the throttle, pull down and open the mixing rod, while observing the mixing situation inside the box, and gradually adjust the mixing speed to the appropriate level. If reverse stirring is used in work, it should be stopped during the transition and pulled down again.

3) When the pump switch is turned off, the sprayed material enters the box through the circulation pipe for jet circulation.

5) According to the ratio of spraying materials, add the spraying substrate to the stirred material in sequence. It should be noted that it should be evenly dispersed and not poured in large quantities to avoid the formation of colloidal packaging, which may affect the spraying effect.

6) All materials are evenly mixed and stirred at low speed or stop, the power clutch is disengaged, the injection valve is opened, and the circulation valve is closed.

7) Keep the spray gun control lever in the spraying direction, place the power clutch in the open position, gradually increase the throttle, and enter the spraying structure.

8) Before use, please check the connection of the positive and negative terminals of the battery. Check whether the screws of each part of the machine are loose, whether there are large foreign objects, and whether the diesel engine has enough diesel.

9) After inspection, fill the diesel tank with water and add diesel from the mailbox (add 10 diesel in winter). Add an appropriate amount of water to the water tank as needed.

10) Start the engine on the diesel engine for top mixing. After starting, lower the clutch behind the operating platform, then hang the gear in the positive direction and increase or decrease the throttle control as needed until fully mixed.

11) When stopping use, simply reduce the throttle and turn off the engine.

The above is the introduction of the operation steps of slope greening equipment brought to you by the editor, hoping to be helpful to everyone!

Slope greening equipment manufacturer comes up with a clever solution to solve the mud pump failure of the sprayer

In the previous chapter, the editor mainly listed the common manifestations of faults in the mud pump of the sprayer. In the following article, the editor will answer questions and provide targeted solutions for slope greening equipment manufacturers to solve the problems that occurred in the mud pump of the sprayer in the previous article.Tip 1: Solve the problem of not being able to suck on its owna. The mud pump body of the sprayer is not filled with storage fluid or the storage fluid is insufficient, but sufficient storage fluid is added;b. Leakage in the suction pipeline of the mud pump of the sprayer, check and eliminate the leakage phenomenon;c. The mud pump speed of the sprayer is too low, adjust the sprayer speed;d. The suction stroke of the mud pump of the sprayer is too high or the suction pipeline is blocked, reducing the suction stroke or shortening the suction pipeline;e. Impeller flow channel or suction pipeline blockage, eliminate pipeline blockageTip 2: Insufficient stress reliefa. The impeller or impeller sealing ring is severely worn, replace the mouth ring;b. Insufficient power and low speed, adjust to speed by adding full horsepower;c. The import or export valve is not fully opened, fully open the import or export valve.Tip 3: Solve the problem of excessive consumptiona. Excessive traffic, reduce traffic; The speed is too high, reduce it appropriately;b. Correction or replacement of pump shaft distortion or impeller jamming;c. The flow channel inside the pump is blocked or stuck, eliminate the blockaged. The noise and vibration of the mud pump in the sprayer are relatively high;e. Unstable footing, reinforce;f. Cavitation phenomenon, adjust working conditions;g. The bearing is severely worn and needs to be replaced with a new one;Tip 4: Solve the problem of loud noise and vibrationa. The flow channel inside the sprinkler pump of the sprayer is blocked or stuck, correct or replace it;b. If there are debris in the sprinkler pump or inlet pipeline of the sprayer, remove the debris;c. The main axes of the sprinkler pump and the power machine are different, adjust the coaxiality;Looking at the small tricks listed by the manufacturer of slope greening equipment for solving the problem of mud pump failure in the sprayer, do you feel like the whole world is beautiful in an instant? I sincerely hope that the tips summarized by the editor can be helpful in solving the problem of the mud pump in the sprayer. I have listed them one by one, and I hope that my efforts can be shared to a great extent.

2025-07-08

What aspects of inspection should be carried out on the diesel engine before using slope greening equipment

Slope greening equipment, mainly aimed at highway (railway) slope greening, slope protection, mountain governance, mine greening, desert control, garbage landfill treatment and other projects, to improve the ecological environment landscape. Today, the editor will introduce to you the detailed operation steps of slope greening equipment. The diesel engine is the power source of the slope greening equipment sprayer. To ensure the dynamic performance of the diesel engine, the following checks were conducted on the diesel engine before starting the slope greening equipment.1. Check the water condition of the water tank before starting the sprayerWhen the diesel engine is working, excessive temperature in the engine body will be cooled by water cooling. Once the water tank is short of water, it can cause cylinder card failure and bring disaster to the diesel engine.2. Check the status of diesel hydrogenationDiesel is the fuel for diesel engines. Add enough oil to the diesel engine. In addition, after adding diesel, place the air in the oil circuit (loosen the bolts on the fuel filter, continuously press the low-pressure manual pump, and discharge the air in the oil circuit).3. Check the refueling statusPull out the dipstick, clean up any residue on the cloth or soft paper, and then insert it again. After pulling it out, check which position of the adhesive oil is above the warning line.Through the above three inspections of the diesel engine, if everything is normal, the slope greening equipment can be safely started.

2025-07-08

Suggestions on choosing a soil spraying machine for highway greening

In recent years, with the improvement of people's economic level, almost every family has bought a car. Due to urban congestion, highways have become a key transportation point for travel, so greening highways should be given more attention.When greening the slopes of highways, good greening equipment should be selected. Luoyang Wofa Spraying Machine has been producing soil spraying machines for long-term use in highway greening, mine greening, garbage landfill, etc. When we use soil spraying machines to green both sides of the highway, not only does it become beautiful, but the use of vegetation on the road can also reduce vehicle noise, greatly reduce exhaust emissions, and residents on both sides will not be affected by air pollution. Of course, tall fescue and dogtooth root are usually chosen as vegetation, which have relatively low costs. When planting, only some basic methods need to be followed, and then seasonal pest control should be carried out to avoid large-scale pest erosion of the grass. Of course, in the process of planting, the main thing is for workers to handle it carefully. If the grass seeds are just randomly planted in the soil, it is even more impossible to achieve large-scale grass greening. However, for the greening of high slopes, attention should be paid to the selection of vegetation and sprayers.For green equipment such as soil spraying machines, durable and widely used equipment should be selected as much as possible, because the construction requirements vary for different slopes, some requiring mud and some requiring grass fibers.The main purpose of selecting vegetation is to prevent water erosion and protect the roadbed. Of course, it can also reduce noise and create a more beautiful driving environment, so that drivers can have a happier mood while driving. After the construction of highways, soil problems are more likely to occur, so efforts should be made to avoid damaging the natural terrain and to use some herbs that are more convenient to plant. This will save time and money, and also facilitate future management.The above are the suggestions provided by the editor regarding the selection of soil spraying machines and vegetation for highway greening. We hope they are helpful to everyone!

2025-07-08